CE Approved Construction Hoist Construction Passenger Elevator Building Lift

• Customization: Available
• After-sales Service: Installation
• Warranty: 1 Year
• Model NO.: sc200/200; sc100/100; sc200; sc100; sc150
• Type: Rack and Gear
• Load Capacity: ＜1T
• Speed: 40M/Min - 60M/Min
• Usage: Construction Hoist
• Sling Type: Chain
• Lift Drive / Actuation: Electric Motor
• Lift Mechanism: Rack and Gear
• Attendant: With Attendant
• Deceleration Device: With Deceleration Device
• Elevator Door: Straight Fractional Door
• Cage: Double Cage(with Operation Cabin or No Cabin)
• Cage Dimension: 3*1.5*2.2m, 3*1.3*2.2m, 3.2*1.5*2.2m(Changeable )
• Rated Lifting Speed: 60m/Min
• Max Erection Height: 250m
• Motor Power: 2X13kw Per Cage
• Mast Section Size: 650X650X1508mm (or 800X800X1508mm)
• Mast Section Weight: 145-180kg (Double Racks)
• Wall-Tie Adjust Length&Qty: 2.8-3.2m 1pieces/5 Mast (Can Be Adjusted)
• Main Electrical System: Schneider(Can Be Equipped with PLC Fault Sensor )
• Transport Package: Container
• Specification: SC100, SC200, SC150, SC100Z, SC150Z, SC200Z
• Trademark: XINGDOU
• Origin: China
• HS Code: 84281090
• Production Capacity: 1000sets / Year

Product Description

CE approved construction hoist constrcution passenger elevator building lift with mast section

Product Description

 

1. construction material hoist/lift/elevator with rack and pinion could be design according to different building situation

2. With ISO9001, CE, SGS, BV, SASO certifications

3. Double or Single cage with loading capacity from 500kg to 3000kg

4. With Frequency Inverter or DOL control system with low speed, MID speed, and high speed

5. All Production Line adopt special fixture, mould, gauge made by us to ensure all detaile size

6. Select high quality raw material from China Bao Steel Group, other like motors, reducers, gearbox, safety device with low noise, electrics is schneider or Korea repute brand with reliable quality

7. Special design, compact and reasonable structure, easy to installation and adjustment

8. Each equipment should be test and make record in Factory, all details will be adjust like
Motor brake, safety device operation, all limit switch operation, dropping test, loading test, and mast section erection test to ensure the completed equipment run well when taken into use
 

Product Parameters

1. Personnel and materials construction material hoist/lift/elevator with rack and pinion of common models: 

Characteristic	Model	Rated Loading	Lifting Speed	Motor Power
Double cages	SC200/200	2x2000kg	33m/min	2x(3x11kw) / 2x(3x8.5kw)
	SC150/150	2x1500kg	33m/min	2x(2x13kw)
	SC100/100	2x1000kg	33m/min	2x(2x11kw)
Single cage	SC200	2000kg	33m/min	3x11kw /3x8.5kw
	SC150	1500kg	33m/min	2x13kw
	SC100	1000kg	33m/min	2x11kw

2. Personnel and materials construction material hoist/lift/elevator with rack and pinion

Characteristics		Model	Rated Loading	Lifting Speed	Motor Power
Double cages	Low speed	SC200/200D	2X2000kg	0-40m/min	2x(3x11kw) /2x(3x8.5kw)
		SC100/100D	2x1000kg	0-40m/min	2x(2x13kw)
	Mid speed	SC200/200Z	2x2000kg	0-60m/min	2x(2x23kw)
		SC100/100Z	2x1000kg	0-60m/min	2x(2x15kw)
Single cage	Low speed	SC200D	2000kg	0-40m/min	3x11kw /3x8.5kw
		SC100D	1000kg	0-40m/min	2x13kw
	Mid speed	SC200Z	2000kg	0-60m/min	2x23kw
		SC100Z	1000kg	0-60m/min	2x15kw

 

Detailed Photos

A.Producing process:   
Strict material selection-  blanking- inspection - welding-inspection- Blasting - inspection -Baking finished or galvanized- inspection -Finished product

The product can be customized according to customers'requirements (drawing, specifications and so on). 

B. Special design for construction material hoist/lift/elevator with rack and pinion

The cage is boarded up by all punched aluminium sheet (anti-aging, anti-rust, lightweight and beautiful) or punched steel sheet (stable). The main structure of cage is made of high quality steel after bending. The bended steel is firm, stability, moreover it can ensure stability for the whole structure.
 1. Bottom and roof of cage adopt trapezoidal frame. Bottom and the roof are full symmetry.  
2. The plane of symmetry are connected by Bending plate, bending channel and square pipe which make it
firm, straight and balance in use.  
3. The wall around cage can be fixed by punched aluminum plate, punched zinc plate, punched steel plate,
steel wire mesh.
4. Surface treatment: blasting, baking finished, galvanized.
 (Optional Size:3x1.5x2.1m, 3x1.3x2.1m, 3.2x1.5x2.1m, 3.2x1.3x2.1m, 3x1.5x2.4m, 3x1.3x2.4m, 
3.2x1.5x2.4m, 3.2x1.3x2.4m etc.)
construction material hoist/lift/elevator with rack and pinion(lift,elevator)  :The cage can be customized according to customers' requirements (drawing, specifications and so on).


C. Mast section with rack for construction material hoist/lift/elevator with rack and pinion

 I: About the mast section:The Mast section (color is variable) is made of seamless tube or HF welded tube.
 1. Steel plates are bented of U-shape to strengthen the mast section.
2. Mast section with galvanized coat or heat spray coat can be chosen.
3. High quality steel plate Q345B bended by special machine: Thickness 4.5mm.  
4. Welded steel tube Q345B and seamless steel tube 20# are also available: Ø76*4.5mm or Ø89*4.5mm 
(Thickness of 6mm or 8mm is also available).
5. 650*650*1508mm is the most common size fits for clients. Other model of mast section can choose: 
    450*450*1508mm, 650*900*1508mm,800*800*1508mm
Construction elevtor/lift/hoist for korea and Vietnam The mast section can be customized according to customers' requirements (drawing, specifications and so on). 

II: About the rack:
1. Model: 40*60*1508mm, or 40*60*1483mm or OEM according to drawing or sample.
2. Materials: CL60 special rail steel, 60# high quality carbon steel (common use) or other type C55,C50,
C45 according to your requirement.
Building hoist/building construction elevator/construction material hoist
The rack can be customized according to customers' requirements (drawing, specifications and so on). 


D. Safty Measures:
Completed safety measures for construction material hoist/lift/elevator with rack and pinion

1. Equipping with Anti-falling governor	5. Overload protector
2. Electrical an Mechanical interlock: Door safety switches, Slack rope switch	6. Bottom Buffer
3. Safety hook	7. Level Calling system and auto leveling device to be choose
4. Upper and bottom limit switches, trap door limit switch	8. Ramp door for (Ex.door of cage)

Company Profile

Shandong Xingdou Intelligent Co., Ltd is a professionalmanufacturer and exporter for construction material hoist/lift/elevator with rack and pinion

1. 17 years more manufacturing experience and 10 Years exporting experiences	4. Best price offered with special discount, high quality you can enjoy
2. Great technician Team with innovation and improvement alibilties	5. Fast response with sales and after-sale service
3. Zero accident record and good feedback from enduser	6. Welcome agent or distributor all over the world for cooperation partnership

We Have exported construction material hoist/lift/elevator with rack and pinion for more than 45 countries,you can get high quality products and professional service from us.Any question from you is welcome and will get reply within 12 hours.
Wendy Sun
(86-17854195506)